start stop push button control station for hazardous area zone1/ 2
Description:
Explosion proof control stations are designed to contain and
extinguish explosions. The cast aluminum housing and bolts can
withstand explosion pressures. The contact surface between top and
bottom is wide to allow for combustion gases to cool down, pass
through, and release pressure without igniting any explosive
environment.
Explosion proof control unit - Start / stop push button, 2 gang,
CNEX certified. 2 gang standard control station, start (green I)
and stop (red) pushbuttons c/w 1 x normally open or normally closed
contact, IP65 glass fibre reinforced polyester enclosure. explosion
protection: Ex II BGD, Ingress protection: IP 66, Ambient
temperature: -20 ºC .....+40ºC, Cable entries: as your need
More info
Explosion proof CNEX start / stop push button control station unit.
2 gang standard control station
Start (green I) push button c/w 1 x normally open contact and Stop
(red O) push button c/w 1 x normally closed contact
Glass fibre reinforced polyester enclosure
Atex hazardous area zone 1, zone 2, zone 21 and zone 22 certified
Explosion protection: Ex II B GD
Ingress protection: IP 65
Ambient temperature: -20 ºC .....+40ºC
Cable entries: as your need
Technical details
Actuator - top Momentary pushbutton with insert: Green "I"
Actuator - bottom Momentary pushbutton with insert: Red "O"
Contacts 1 x normally open and 1 x normally closed
Enclosure material Polyester resin, glass fibre reinforced
Rate voltage upto 690V – 50/60Hz
Rated current 16A
Ingress protection: IP65
Cable entries as your need (bottom face)
Gasket PU foam
Cover fixing screws captive M4 stainless steel socket head cap
screw
Operating temperature -20°C to +40°C ambient (-50°C to +60°C upon
request)
Overall dimensions H 140mm x W 80mm x D 85mm approx.. (excluding
cable gland)
Weight
0.5 kg
