explosion proof transfer switch 10A-60A , 3 pole explosion proof
switch
Description:
The explosion proof transfer switch has a voltage of 220V-380V, and
the built-in transfer switch is used as a power supply switch in
the electric circuit of current 10-60A, and can control the motor
starting, stopping, shifting, reversing, etc. for the composite
explosion-proof structure, the switch box The explosion-proof
structure is adopted, and the junction box adopts an increased
safety structure.
Application:
Designed for Explosive atmosphere Zone land Zone 2
Designed for Groups IIA, IIB, IIC
Designed for Combustible dust Zone20, Zone 21, Zone22
Designed for Temperature classesT6
Apply to oil drilling platforms, offshore oil platform, oil
derrick, etc for the dangerous sites
Features:
1, The explosion proof transfer switch encolsure is cast aluminum,
surface sprayed;
2, the product is in the voltage 220V-380V, the built-in transfer
switch is used as the power supply switch in the electric circuit
of current 10-60A, and can control the starting, stopping,
shifting, reversing, etc. of the motor;
3, steel pipe and cable wiring
4. Composite explosion-proof structure, the switch box adopts the
explosion-proof structure, and the junction box adopts the
increased safety structure.
5, in the electrical equipment and power distribution equipment
infrequently connected breaking load circuit and short-circuit
protection with built-in switches and fuses, can quickly break and
close the steel pipe or cable wiring, cable wiring must be equipped
with cable clamping sealing joint
6. This product is a 3-pole switch, which can be used as a 2-pole
switch. If you need a 4-pole switch, the housing specifications
need to be changed accordingly.
7, in line with GB3836-2000, IEC60079 standard requirements
8, built-in transfer switch, used in electrical lines below 60A, as
a power supply switch, and can control motor starting, shifting,
stopping, reversing, etc.
9, this product is a 3-pole switch, which can be used as a 2-pole
switch. If you need a 4-pole switch, the housing specifications
need to be changed accordingly.
